Adaptability
Y81 series hydraulic metal baling press is mainly used in compressing the scattered plastic ferrous metal and non-ferrous metal plates and wire rod to certain form block under cold state. It is very convenient to the transportation and smelting.
The baling press adopts the electro hydraulic drive, it includes manual and automatic control, the operation is convenient, performance is reliable. The baled block can be pushed out from side, the baled block can be transported directly, so omitted the porterage.

The technical features of baling press
1. The density of baling block is 2T/M according to the requirement in third grade in conformity with GB4223-84 Recycle Carbon Scrap Steel Category& Technique Terms.
2. The hydraulic components in conformity with the JB2131-77 Hydraulic Components Technique Terms.
3. The electric mechanism in conformity with GB5226-85 Machine Tool Electric Mechanism Technique Terms.
4. The safety and stability of machine run and manual operation in conformity with JB4203-86 the Forging Machine Safety Technique Terms.
5. The hydraulic station adopted the entirety type valve block, and its volume is small, and realize the partial non-pipe design, and it decreases the leakage.
6. The control valve adopted LISHILE series valves, changeover is stable and flexible, and noise is low.
7.Optimizing the system design, assuring the oil temperature is not less than 55�BC.
8. The machine is driven by hydraulic system, and the electric system is automatically controlled by PLC control, which is stable and modification is convenient.
9. Discharge mode used turning bag, pushing bag, fore pushing bag.
10. The machine can be laid in the flattening concrete floor and it needs�ft be made the foundation.

Adaptability
On the condition of not adding additive, the briquette press can compress all kinds of particle and powder of castiron, aluminum, copper, magnesium, titanium, molybdenum etc to the high density metal block. It can be put into blast furnace directly, decreased the cost dramatically.
The main technical features:
1. Electric part is manipulated by PC system, the anti-interference is strong, automation is high and operation is simple.
2. Hydraulic station is adopted the entirety-typed integration valve block and large diameter cartridge inserted valve, this stopped the oil leakage and lowered the oil temperature of system, and enhanced the stability of system.
3. Body part is adopted the entirety cast steel products, and stopped the rupture of steel plate weld assembly, and enhance the stability of machine and lengthen the longevity.
4. Oil cylinder adopted the tandem type cylinder, enhanced the velocity of movement and production efficiency.
5. According to the user�fs working condition, the user can provide spiral automatic feeder machine, chain type automatic discharge machine, and eased the workforce intensity.