|
|
|
Types Of Forging Hammers
We have wide series of forging hammer which are widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forging in bolster dies.- Ready operation: economic and convenient
- Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.
- A special oil-pump is provided for lubricating the cylinders.
|
C41 Series Pneumatic Forging Hammer
| C41 series pneumatic forging hammers don't need any additional compressor or any other machine to start the hammer, customers just need to build the foundation according to the foundation drawing which we will send to customers.
C41 series pneumatic forging hammer consists of the following principal parts: frame, working part, compressing part, driving part, controlling part, lubricating part.
1. The frame is the body of the hammer, also the essential component part of it. The frame is a solid casting with the working and compressing cylinders and the valve chest. While in operation, compressed air from the compressing cylinder enters the working cylinder, making the tup move up and down to do work.
2. The working part is the main part that does all the forging work. It consists of the tup, the guide, and the anvil block. The tup is made of 45# steel, in order to have enough strength and the rated weight, and not changing size under durable operation it is made of hollow shape with a hot fitted cover. The anvil block is primarily used for supporting work pieces and for blowing load exerted by the tup.
3. The compressing part is the main component part of the compression mechanism and is mounted in the compressing cylinder of the frame.
4. The driving part is used to convert the rotary movement of the motor into the reciprocating motion, causing the piston to move up and down.
5. The controlling parts is to direct the compressed air flow from the compressing cylinder to the working cylinder so that various functions of the tup necessary for forging work can be attained.
Ask for Quote |
C66 Series Die Forging Hammer
| Usage of hydraulic forging hammer- Hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammer and the forging hammer with compressor. Also, it can improve the working condition.
- Hydraulic forging hammers have two types: hydraulic free forging hammer and hydraulic die forging hammer.
- Hydraulic free forging hammers also have two types: one is double arm hammer, the other is single arm hammer.
- The advantage, structure and design feature of hydraulic forging hammer as follows:
1. Energy conservation and environmental protection.
2. The operation is convenience,lowering and the act is agility.
3. System work safety, it has safety locking motion.
4. Special structure is more fair and more safety.
Ask for Quote |
C92K Series Numerical Control Hydraulic Die Forging Hammer
| Its Adaptability: The product is used in precision forging and multiple mould forging of all kinds of accessories.
Performance:- Hit energy controled by digitization, you can set it at will.
- The hit frequency is high, the hammer head return fast and no close die phenomena.
- The control system show Chinese word, so people can communicate with the machine.
- The fault diagnosis system can diagnose the machine automated, this can reduce the analysis of failure reason.
- The U-Frame and cast steel machine body entirety.
- We can supply vibration isolation device composed by spring vibration isolation and viscous damping according to the customer's requiement, this remove the vibration produced in the working.
- The X type guide rail structure ensured the good guide and the precision of forgings.
- The hydraulic lift out device ensured the reliability and stability of mold stripping.
Ask for Quote |
|
|
